Screw Refrigeration Compressor: Common Problems, Causes, and Solutions

395 views
News
12/09/2026

A screw refrigeration compressor is one of the most important components in many industrial refrigeration systems, particularly cold storage facilities, food processing plants, seafood processing facilities, freezing systems, and production lines requiring high refrigeration capacity.

Screw Refrigeration Compressor: Common Problems, Causes, and Solutions

A screw refrigeration compressor is one of the most important components in many industrial refrigeration systems, particularly cold storage facilities, food processing plants, seafood processing facilities, freezing systems, and production lines requiring high refrigeration capacity.

Because these compressors often operate continuously under demanding conditions, problems related to lubricating oil, temperature, pressure, capacity control, electrical systems, and mechanical components may develop over time.

Identifying abnormal operating conditions early can help reduce unplanned downtime and prevent minor problems from developing into more serious equipment failures.


1. Why Should Screw Refrigeration Compressor Problems Be Checked Early?

When a screw refrigeration compressor does not operate normally, the performance of the entire refrigeration system can be affected.

A relatively minor problem, if left unchecked, may lead to:

  • Increased discharge temperature.
  • Abnormal operating pressure.
  • Reduced refrigeration capacity.
  • Higher energy consumption.
  • Lubricating oil problems.
  • Increased vibration and noise.
  • Frequent alarms or shutdowns.
  • Reduced continuous operating time.

For this reason, companies should not wait until the compressor stops completely before taking action. Screw refrigeration compressor maintenance should be performed proactively, with abnormal operating signs investigated as early as possible.


2. Screw Refrigeration Compressor Does Not Start

One of the easiest problems to identify is when the compressor receives a start command but does not operate.

The problem may not necessarily be caused by the screw compressor itself. It can also be related to the electrical system, control system, or safety conditions required for starting.

Possible causes include:

  • Unstable power supply.
  • Phase loss or incorrect phase sequence.
  • Electrical protection devices being activated.
  • An alarm from the control system.
  • Suction or discharge pressure outside the permitted starting conditions.
  • Interlock conditions not being satisfied.
  • Problems with the motor or starter.

How to troubleshoot

First, check the electrical system and the alarm codes displayed by the controller.

Do not repeatedly restart the compressor before identifying the cause, particularly when the alarm is related to pressure, temperature, lubrication, or another protective condition.


3. High Discharge Temperature

High discharge temperature is an important warning sign during screw refrigeration compressor operation.

The condition may be associated with:

  • Operating pressure conditions.
  • Oil cooling performance.
  • Refrigerant flow.
  • Cooling system performance.
  • Lubricating oil condition.
  • Compressor load.
  • Other operating conditions within the refrigeration system.

If the temperature continues to increase, the compressor may activate its protective controls and shut down.

Inspection procedure

A technician should evaluate several parameters together, including:

  1. Suction temperature.
  2. Discharge temperature.
  3. Suction pressure.
  4. Condensing pressure.
  5. Oil temperature.
  6. Oil cooling system.
  7. Overall refrigeration system operating conditions.

Reducing compressor load alone may not solve the underlying problem. The root cause should be identified.


4. Abnormally Low Suction Pressure

Low suction pressure can result in insufficient refrigeration capacity and make it difficult for the system to achieve the required temperature.

Possible causes may include:

  • Insufficient refrigerant.
  • Inappropriate refrigerant flow.
  • Problems with the expansion or control valve.
  • Restricted filters or piping.
  • Low refrigeration load.
  • Unsuitable operating conditions.

When this occurs, both the compressor and the refrigeration system should be checked instead of immediately assuming that the compressor is defective.


5. High Condensing Pressure

High condensing pressure can increase the compression ratio and force the compressor to operate under more demanding conditions.

Possible causes include:

  • Poor condenser heat rejection.
  • High ambient temperature.
  • Insufficient cooling-water flow.
  • Cooling fans not operating correctly.
  • Dirty condenser surfaces.
  • Unsuitable operating conditions.

Troubleshooting

The cooling system and condenser should be inspected before determining whether the compressor itself has a mechanical problem.


6. Excessive Vibration or Abnormal Noise

A screw refrigeration compressor naturally produces a certain level of operating noise and vibration.

However, a noticeable increase compared with normal operating conditions should be investigated.

Possible causes include:

  • Bearing or mechanical component problems.
  • Coupling problems.
  • Misalignment between the motor and compressor.
  • Lubricating oil problems.
  • Liquid or foreign material entering the compression area.
  • Unsuitable operating conditions.

Regular vibration monitoring can be useful for tracking the mechanical condition of industrial refrigeration equipment.


7. Abnormal Oil Pressure or Oil System Problems

For screw compressors equipped with an oil-injection system, oil does more than lubricate the machine. Depending on the compressor design, it can also contribute to sealing and temperature control during compression.

Therefore, oil-system problems require careful inspection.

Important inspection points include:

  • Oil level.
  • Oil condition.
  • Oil filter.
  • Oil separator.
  • Oil cooler.
  • Oil piping.
  • Oil pump, where applicable.
  • Relevant oil-system pressure differentials.

Using unsuitable oil or extending the service interval beyond the equipment manufacturer's recommendations may also affect system reliability.


8. Reduced Refrigeration Capacity

One common concern is:

The compressor is still running, but the refrigeration system cannot achieve the required temperature.

This condition requires a comprehensive inspection.

The compressor should not automatically be considered the source of the problem.

Inspection points may include:

  • Suction and discharge pressure.
  • Suction and discharge temperature.
  • Capacity-control system.
  • Slide valve or other capacity-control mechanism, depending on the compressor design.
  • Refrigerant flow.
  • Evaporator.
  • Condenser.
  • Expansion valve.
  • Oil system.
  • Oil separator.

Checking the entire refrigeration cycle can help identify the actual source of the capacity loss.


9. Compressor Frequently Alarms or Shuts Down

If a compressor frequently shuts down automatically, simply resetting the controller and restarting it is not a reliable solution.

Record the following information:

  • Alarm code.
  • Time of failure.
  • Suction pressure.
  • Discharge pressure.
  • Discharge temperature.
  • Oil temperature.
  • Motor current.
  • Compressor load at the time of the alarm.

These operating records can help technicians identify patterns and determine the root cause of repeated shutdowns.


10. Abnormal Oil Loss or Oil Accumulation

The oil system of a screw refrigeration compressor should be monitored throughout its operation.

If oil consumption increases abnormally, the system should be checked for possible oil carryover into the refrigerant circuit and problems involving the oil separator or oil-return system.

Conversely, an abnormal increase in oil level or a significant change in oil characteristics should also be investigated.

Possible causes should be identified rather than simply adding more oil.


11. Unstable Capacity-Control Operation

Screw compressors commonly use capacity-control mechanisms to adapt compressor output to changing refrigeration loads.

If the capacity-control system does not operate correctly, the following symptoms may occur:

  • Compressor capacity does not change as required.
  • Unstable compressor loading.
  • Fluctuating suction pressure.
  • Abnormal loading and unloading cycles.
  • Difficulty maintaining the required system temperature.

The mechanical mechanism, control signals, and operating conditions should all be checked to determine the actual cause.


12. Common Screw Refrigeration Compressor Problems

SymptomPossible CauseInspection Direction
Compressor does not startElectrical, control, or interlock problemCheck power supply and alarm codes
High discharge temperatureCooling, pressure, or oil problemCheck temperature and pressure
Low suction pressureRefrigerant, load, or valve problemCheck the complete system
High condensing pressureCondenser or cooling problemInspect condenser and cooling system
Excessive vibrationMechanical components or couplingMeasure and analyze vibration
Abnormal noiseMechanical or operating conditionIdentify the source
Abnormal oil pressureFilter, pump, or oil circuitInspect oil system
Reduced refrigeration capacityCompressor or refrigeration systemCheck the entire refrigeration cycle
Frequent shutdownsProtective alarm or operating conditionAnalyze alarm history
Abnormal oil lossOil separator or oil-return systemInspect oil circuit

13. Screw Refrigeration Compressor Troubleshooting Procedure

When a screw refrigeration compressor shows abnormal operating conditions, troubleshooting should be performed systematically.

Step 1: Identify the symptom

Determine exactly what is happening:

  • Compressor does not start.
  • High temperature.
  • Abnormal pressure.
  • Excessive vibration.
  • Abnormal noise.
  • Reduced capacity.
  • Alarm or shutdown.

Step 2: Record operating data

Record the main operating parameters at the time the problem occurs.

Step 3: Inspect supporting systems

Check:

  • Oil system.
  • Cooling system.
  • Electrical system.
  • Control system.
  • Valves.
  • Filters.
  • Oil separator.

Step 4: Determine the root cause

The goal should not simply be to remove the immediate symptom. The underlying cause needs to be identified.

Step 5: Repair and test

After corrective work is completed, operating parameters should be checked again and the compressor monitored under appropriate load conditions.


14. When Should Screw Refrigeration Compressor Maintenance Be Performed?

Companies should consider inspection and maintenance when they observe:

  • Increasing operating temperature.
  • Changes in operating noise.
  • Increased vibration.
  • Unstable pressure.
  • Frequent alarms.
  • Reduced refrigeration capacity.
  • Abnormal oil condition.
  • Increased energy consumption compared with normal operation.

More importantly, screw refrigeration compressor maintenance should not only be performed after a failure occurs.

Preventive maintenance helps identify abnormal conditions early and allows companies to plan equipment maintenance more effectively.


15. Should You Repair a Screw Refrigeration Compressor Yourself?

Basic observations, such as checking alarm codes, recording operating parameters, and visually inspecting external conditions, may be performed according to the equipment's operating procedures.

However, work involving:

  • Compressor disassembly.
  • Rotor inspection.
  • Bearing inspection.
  • Oil-system inspection.
  • Mechanical alignment.
  • Electrical-control troubleshooting.
  • Detailed vibration analysis.

should be performed by qualified technicians following appropriate safety procedures.

Industrial refrigeration compressors can operate under high pressure and demanding conditions, so improper intervention may create additional equipment and safety risks.


16. Cong Nghiep BA – Industrial Refrigeration Maintenance and Troubleshooting

For industrial refrigeration systems, troubleshooting should not focus exclusively on the compressor.

The relationship between the major components should also be evaluated:

Compressor → Oil System → Oil Separator → Condenser → Valves → Evaporator → Control System

Cong Nghiep BA provides consultation and support for industrial refrigeration system inspection, maintenance, and troubleshooting based on the actual condition and configuration of each system.

When contacting a technical team, providing information such as the compressor model, refrigerant type, alarm condition, operating parameters, and observed symptoms can help improve the initial assessment.


17. Conclusion

A screw refrigeration compressor is a sophisticated component, and an abnormal symptom can have several possible causes.

Problems such as high temperature, abnormal pressure, excessive vibration, unusual noise, reduced capacity, oil-system abnormalities, and frequent shutdowns should be investigated systematically.

Regular screw refrigeration compressor maintenance, continuous monitoring of operating parameters, and early troubleshooting can help improve the reliability and stability of industrial refrigeration systems.


FAQ

What are the most common screw refrigeration compressor problems?

Common problems include failure to start, high discharge temperature, abnormal pressure, excessive vibration, abnormal noise, oil-system problems, reduced refrigeration capacity, frequent alarms, and automatic shutdowns.

Why does a screw refrigeration compressor have a high discharge temperature?

Several factors may contribute, including operating pressure, cooling performance, oil condition, refrigeration load, and other system operating conditions. Actual operating data should be checked to identify the specific cause.

Is excessive compressor vibration dangerous?

Abnormally high vibration should be investigated promptly because it may be related to mechanical components, bearings, coupling, alignment, or other operating conditions.

When should screw refrigeration compressor maintenance be performed?

Maintenance should follow the equipment manufacturer's recommendations and should also be considered whenever abnormal temperature, pressure, vibration, noise, oil condition, or repeated alarms are observed.

Can a screw refrigeration compressor be repaired without professional technicians?

Basic inspections may be performed according to the equipment operating procedure, but major mechanical, electrical, oil-system, and compressor disassembly work should be handled by qualified technicians.

0.0           0 reviews
0% | 0
0% | 0
0% | 0
0% | 0
0% | 0
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions

Cám ơn bạn đã gửi đánh giá cho chúng tôi! Đánh giá của bạn sẻ giúp chúng tôi cải thiện chất lượng dịch vụ hơn nữa.

Send actual photo

Only accept JPEG, JPG, PNG. Capacity not more than 2Mb per image

ĐÁNH GIÁ SẢN PHẨM

  • Filter:
  • All
  • 1
  • 2
  • 3
  • 4
  • 5
Share

Related posts

Mycom Compressor Repair

Kho Lạnh Công Nghiệp Là Gì

What is a freezing conveyor belt?

Compressor Repair Services

OUR PARTNERS

Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions
Screw Refrigeration Compressor: Common Problems, Causes, and Solutions