Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison

405 views
News
09/09/2026

Oil-injected and oil-free screw refrigeration compressors are two different approaches used in industrial refrigeration systems. The main difference lies in whether oil is introduced into the compression chamber during the compression process.

Oil-Injected and Oil-Free Screw Refrigeration Compressors: A Detailed Comparison

Oil-injected and oil-free screw refrigeration compressors represent two different technology approaches in the design of compressors using screw rotors.

In industrial refrigeration systems, the compressor is the equipment that creates the pressure difference required for the refrigerant to circulate throughout the system.

For oil-injected screw compressors, oil is introduced into the compression process to support lubrication, sealing, and temperature control. After leaving the compression chamber, the oil is separated from the refrigerant stream and circulated back through the oil system.

Meanwhile, oil-free screw compressor designs limit the introduction of oil into the compression chamber through specialized mechanical solutions and rotor designs. However, “oil-free” does not mean that the entire machine contains no oil or lubrication system; the actual configuration must be determined according to the specific compressor design.

Therefore, when selecting compressors for cold storage, freezing systems, IQF systems, chillers, or food-processing plants, it is necessary to evaluate the overall operating conditions, rather than simply choosing between oil-injected and oil-free technology.


1. What Is an Oil-Injected Screw Refrigeration Compressor?

An oil-injected screw refrigeration compressor is a type of compressor in which oil is introduced into the compression process together with the refrigerant.

Two screw rotors rotate inside the compressor housing, creating working chambers with variable volumes.

During this process, the oil can perform several functions simultaneously:

  • Lubricating moving components.
  • Helping seal the clearance between the rotors and compressor housing.
  • Absorbing part of the heat generated during compression.
  • Helping reduce internal leakage.
  • Protecting mechanical components.

Technical documentation for screw refrigeration compressors shows that oil is injected into the compressor to seal operating clearances and absorb a significant portion of the heat generated during compression. The oil then needs to be cooled and returned to the system.

Recommended image: A cutaway view of a screw compressor clearly showing the rotors, compressor housing, bearings, and oil circuit.


2. Construction of an Oil-Injected Screw Refrigeration Compressor

The exact construction varies depending on the model, but an industrial oil-injected screw compressor generally consists of the following main groups of components:

Screw Rotors

The compressor consists of a male rotor and a female rotor.

The two rotors create working chambers that allow the refrigerant to be drawn in, transported, and compressed.

Compressor Housing

The housing surrounds the rotors and provides highly precise working surfaces.

Motor

The motor supplies the power required to rotate the main rotor.

Oil System

Depending on the configuration, the oil system may include:

  • Oil reservoir/separator
  • Oil filter
  • Oil cooler
  • Oil lines
  • Control valves
  • Oil pump, depending on the configuration

Capacity Control System

Many compressors use a slide valve or an equivalent control mechanism to adjust refrigeration capacity.

Technical documentation on screw compressors shows that a slide valve can be used to control the actual amount of refrigerant being compressed, thereby adjusting compressor capacity.

Protection and Control System

This system includes sensors, switches, controllers, and protection functions designed to monitor:

  • Suction pressure
  • Discharge pressure
  • Discharge temperature
  • Oil temperature
  • Oil pressure
  • Electrical current
  • Operating conditions

3. Operating Principle of an Oil-Injected Screw Compressor

The operating process can be summarized as:

Refrigerant suction → Rotor chamber filling → Oil injection → Compression → Discharge of refrigerant-oil mixture → Oil separation → Oil circulation

As the rotors rotate, refrigerant enters the suction chamber.

The refrigerant-filled chambers are then closed and move along the rotors.

The volume of the chambers gradually decreases, causing the refrigerant pressure to increase.

During this process, oil is injected into the compression chamber to help provide sealing and absorb heat.

After compression, the refrigerant-oil mixture leaves the compressor.

The oil is separated from the refrigerant through the oil separation system and is then cooled, filtered, and circulated back into the compressor.

This is one of the most important characteristics distinguishing oil-injected screw compressors from oil-free designs.


4. What Is an Oil-Free Screw Refrigeration Compressor?

An oil-free screw refrigeration compressor refers to a group of compressors designed not to introduce lubricating oil directly into the compression chamber, according to the specific technology used.

The main objective of this design is to separate the refrigerant compression process from the oil system.

To achieve this, the compressor may incorporate technical solutions such as:

  • Rotors designed with appropriate clearances.
  • Synchronizing gear systems.
  • Sealing systems.
  • Special materials or coatings.
  • Separate lubrication systems for mechanical components.
  • Dedicated control and cooling systems.

Therefore, when using the term “oil-free,” it is important to refer to the manufacturer's technical documentation.

It should not be assumed that the entire compressor is completely free of oil in every component.


5. Construction of an Oil-Free Screw Refrigeration Compressor

Compared with oil-injected compressors, oil-free designs may require more complex mechanical solutions to control clearances and synchronize the rotors.

The components may include:

  • Male rotor
  • Female rotor
  • Compressor housing
  • Motor
  • Synchronizing gear system
  • Bearings
  • Sealing system
  • Suction port
  • Discharge port
  • Cooling system
  • Control system
  • Protection devices

The actual configuration varies depending on the technology used by each manufacturer.

Suggested image: A cutaway image of an oil-free compressor, preferably showing the rotors and synchronizing gear system.


6. Operating Principle of an Oil-Free Screw Compressor

The basic operating principle remains:

Suction → Compression → Discharge

However, the compression process does not rely on direct oil injection into the compression chamber as in an oil-injected compressor.

The rotors rotate and create chambers with changing volumes.

The refrigerant is drawn into the compression chamber, transported, and compressed as the chamber volume decreases.

The key point is that the design must precisely control:

  • Rotor clearance
  • Temperature
  • Thermal expansion
  • Motion synchronization
  • Sealing
  • Internal losses

This is why oil-free screw compressor construction can be complex and requires a high degree of manufacturing precision.


7. Comparison of Oil-Injected and Oil-Free Screw Refrigeration Compressors

CriteriaOil-Injected Screw CompressorOil-Free Screw Compressor
Oil in compression chamberYesNo, according to the compression-chamber configuration of the technology
Lubrication of compression chamberYesNo direct oil lubrication
Oil-based sealingYesNo
Oil separationImportant functionNot based on the same oil-injected principle
Clearance controlImportantVery important
Compression coolingSupported by oilBased on a dedicated design
ConstructionCommon in industrial refrigerationDepends on the technology
MaintenanceFocuses on oil, oil filtration, and oil separationFocuses on rotors, bearings, seals, and dedicated systems
ApplicationsVery broadDepends on specific requirements
Equipment selectionBased on refrigeration load and operating conditionsBased on technology and application requirements

8. Advantages of Oil-Injected Screw Refrigeration Compressors

Effective Sealing

Oil helps seal the clearances between the rotors and compressor housing.

This helps reduce internal leakage during the compression process.

Cooling Support

Oil absorbs part of the heat generated during compression.

Therefore, controlling oil temperature is an important part of system design.

Industrial Operating Capability

Screw compressors are widely used in systems with large refrigeration loads and long operating hours.

Capacity Control

A slide valve or other control systems can be used to adjust compressor capacity according to the actual refrigeration load.

Wide Range of Applications

They can be found in:

  • Cold storage facilities
  • Frozen storage facilities
  • Seafood processing plants
  • Food-processing plants
  • Freezing systems
  • IQF systems
  • Industrial chillers
  • NH₃ refrigeration systems

9. Limitations of Oil-Injected Screw Compressors

Because oil comes into contact with the compression process, the oil system must be properly controlled.

Important factors include:

  • Oil quality
  • Oil temperature
  • Oil pressure
  • Oil filtration
  • Oil separation
  • Oil return
  • Oil carried over with the refrigerant

If the oil separation or oil return system does not operate properly, oil may enter the refrigeration system and affect system performance.

Therefore, oil management is one of the most important maintenance tasks for an oil-injected screw compressor.


10. Advantages of Oil-Free Screw Refrigeration Compressors

Oil-free technology has the important advantage of reducing dependence on oil within the compression chamber itself.

This can make it suitable for applications with specific oil-control requirements.

In addition, separating the compression process from the oil system may help reduce certain oil-related issues in the refrigerant stream, depending on the specific technology.

However, the entire system should be evaluated rather than focusing solely on the “oil-free” advantage.


11. Limitations of Oil-Free Screw Compressors

Oil-free compressors are not always the better choice.

This technology has its own technical requirements.

Important factors to control include:

  • Rotor clearance
  • Machining precision
  • Thermal expansion
  • Rotor synchronization system
  • Sealing
  • Cooling
  • Bearings
  • Control system

Therefore, selecting an oil-free compressor should be based on the technical requirements of the refrigeration system and the manufacturer's documentation.


12. Is an Oil-Injected or Oil-Free Screw Refrigeration Compressor More Suitable?

There is no universal answer for every refrigeration system.

The selection should be based on:

Refrigeration Capacity

The larger the refrigeration load, the greater the requirements placed on the compressor.

Refrigerant

The exact refrigerant used by the system must be determined.

Examples include:

  • NH₃/R717
  • CO₂/R744
  • R134a
  • R404A
  • R507
  • Other refrigerants according to the system design

Not every compressor is compatible with every refrigerant.

Evaporating Temperature

Evaporating temperature directly affects the compressor's operating conditions.

Condensing Temperature

A high condensing temperature can increase the compression ratio and the required compressor power.

Load Conditions

It is necessary to consider whether the system operates under:

  • High load
  • Medium load
  • Low load
  • Variable load

Operating Requirements

Particular attention should be paid to:

  • Stability
  • Efficiency
  • Load adjustment capability
  • Maintenance
  • Operating costs
  • System cleanliness

13. Applications of Screw Refrigeration Compressors in Industry

Cold Storage

Screw compressors are used to provide refrigeration capacity for chilled and frozen storage facilities.

Industrial Freezing Systems

They meet the high refrigeration loads required by industrial freezing lines.

Seafood Processing Plants

Applications include:

  • Frozen storage
  • Freezing
  • Water cooling
  • Seafood processing
  • Raw material preservation

IQF Systems

Screw compressors can be used as the refrigeration source for Individual Quick Freezing systems.

Industrial Chillers

They can be used to supply chilled water or secondary refrigerant for production processes.

Food Processing Plants

They support many processes requiring temperature control during production and storage.


14. Checklist for Selecting a Screw Compressor

Before selecting equipment, businesses should determine:

ParameterInformation to Determine
Refrigeration capacitykW or RT
RefrigerantNH₃, CO₂, R134a, etc.
Evaporating temperatureActual operating conditions
Condensing temperatureDesign conditions
Motor powerAccording to compressor requirements
Load conditions100%, 75%, 50%, etc.
Capacity controlSlide valve/VFD/other solutions
Oil systemIf an oil-injected compressor is used
Control systemPLC and protection devices
Environmental conditionsTemperature, cooling water, ventilation

These factors provide an important basis for selecting the correct model rather than choosing equipment based solely on motor power.


15. Maintenance of Oil-Injected and Oil-Free Screw Refrigeration Compressors

For Oil-Injected Compressors

The following should be inspected:

  • Oil level
  • Oil pressure
  • Oil temperature
  • Oil quality
  • Oil filter
  • Oil separator
  • Oil return line
  • Oil cooling system

For Oil-Free Compressors

Particular attention should be given to:

  • Rotors
  • Clearances
  • Bearings
  • Sealing system
  • Synchronizing gears, if applicable
  • Operating temperature
  • Vibration
  • Noise
  • Control system

Maintenance schedules should not be based on a single fixed interval for every compressor. They should be determined according to the model, operating conditions, and manufacturer's recommendations.


16. Signs That a Screw Compressor May Be Experiencing Problems

Some signs that require inspection include:

  • High discharge temperature.
  • Abnormal discharge pressure.
  • Low oil pressure.
  • High oil temperature.
  • Reduced refrigeration capacity.
  • Increased power consumption.
  • Abnormal vibration.
  • Increased noise.
  • Frequent fault alarms.
  • Compressor shutdown due to protection functions.
  • Abnormal oil presence in the refrigeration system.

The cause should not be determined based on a single symptom.

The compressor, oil separator, condenser, evaporator, expansion valve, piping, and control system should be inspected together.


17. Conclusion

Oil-injected and oil-free screw refrigeration compressors both have their own roles in industrial refrigeration.

Oil-injected compressors use oil for lubrication, sealing, and supporting temperature control during compression. This is a very common configuration in industrial refrigeration systems.

Meanwhile, oil-free compressors use other technical solutions to minimize oil within the compression chamber and meet specific application requirements.

Therefore, it should not be simply concluded that oil-injected compressors are better than oil-free compressors, or vice versa.

The appropriate solution should be selected based on:

Refrigeration capacity + refrigerant + evaporating temperature + condensing temperature + load conditions + operating requirements + maintenance conditions.

For industrial refrigeration projects, selecting the right compressor from the beginning helps the system operate reliably, minimize operational risks, and optimize long-term performance.

Công Nghiệp BA can provide consultation on compressor and industrial refrigeration system solutions based on the actual operating conditions of each project.

0.0           0 reviews
0% | 0
0% | 0
0% | 0
0% | 0
0% | 0
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison

Cám ơn bạn đã gửi đánh giá cho chúng tôi! Đánh giá của bạn sẻ giúp chúng tôi cải thiện chất lượng dịch vụ hơn nữa.

Send actual photo

Only accept JPEG, JPG, PNG. Capacity not more than 2Mb per image

ĐÁNH GIÁ SẢN PHẨM

  • Filter:
  • All
  • 1
  • 2
  • 3
  • 4
  • 5
Share

Related posts

Mycom Compressor Repair

Kho Lạnh Công Nghiệp Là Gì

What is a freezing conveyor belt?

Compressor Repair Services

OUR PARTNERS

Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison
Oil-Injected vs. Oil-Free Screw Refrigeration Compressors: A Detailed Comparison